Black Berkey® Elements Replacement Filters (Set of 2)
Black Berkey® Elements Replacement Filters - Set of 2
Looking for an alternative? In lieu of Black Berkey® Elements Replacement Filters, we recommend the Phoenix Gravity New Millennium Edition Filter Elements.
Black Berkey® Elements are replacement filter elements designed for use with Berkey® gravity-fed stainless steel water systems. This set includes two 9-inch elements for installation in the upper chamber of compatible Berkey® systems.
These elements are commonly used by Berkey® owners who want to maintain their system, replace older elements, or keep an extra set on hand for routine filter changes.
*Due to state regulations, this item is not available for sale in California or Iowa.
What Is Included?
- Two 9-inch Black Berkey® Elements
- Two washers
- Two wing nuts
- One priming button
Black Berkey® Elements are sold as a set of two. They install in the upper chamber of compatible Berkey® systems.
Key Product Details
| Product Type | Replacement gravity-fed filter elements |
| Sold As | Set of 2 elements |
| Element Size | 9 inches |
| Chamber Location | Upper chamber |
| Approximate Lifespan | Up to approximately 3,000 gallons per element under typical use conditions |
| System Capacity With Two Elements | Up to approximately 6,000 gallons before replacement is recommended |
| Warranty | Two-year prorated warranty |
| Country of Manufacture | Made and assembled in the USA |
Compatible Berkey® Systems
Black Berkey® Elements are compatible with the following Berkey® stainless steel systems:
- Travel Berkey Water Filter - 1.5 gallons
- Big Berkey Water Filter - 2.25 gallons
- Royal Berkey Water Filter - 3.25 gallons
- Imperial Berkey Water Filter - 4.5 gallons
- Crown Berkey Water Filter - 6 gallons
Elements may also fit some other gravity-fed systems. Always confirm fit, threading, chamber height, and installation requirements before use.
About Black Berkey® Elements
Black Berkey® Elements are designed for gravity-fed filtration. Water placed in the upper chamber passes through the elements and collects in the lower chamber for convenient daily use.
These elements use a proprietary blend of media in a dense filter matrix. The design creates a long contact time as water moves through the element, which supports the filtration process and helps improve drinking water taste and quality.
Black Berkey® Elements have been tested by independent third-party laboratories for their ability to reduce many common substances that may be found in drinking water. For the most accurate and current information, customers should review the manufacturer’s official test data and product documentation.
Substances Addressed in Third-Party Testing
According to manufacturer-provided testing information, Black Berkey® Elements have been tested for reduction of a broad range of substances commonly discussed in drinking water quality, including:
- Chlorine
- Chloramines
- Lead
- Mercury
- Arsenic
- Iron
- Trihalomethanes, also known as THMs
- Volatile organic compounds, also known as VOCs
- Pharmaceutical compounds
- Petroleum-related compounds
- Perfluorinated chemicals
- Rust, silt, and sediment
- Selected radiological contaminants
- Bisphenol A, also known as BPA
- Atrazine
Actual performance can vary based on water quality, setup, usage, maintenance, and the condition of the element. Replace and maintain elements according to the manufacturer's instructions.
Filter Lifespan
Each Black Berkey® Element is designed to filter approximately 3,000 gallons of water before replacement is recommended. A system using two elements can filter approximately 6,000 gallons total before replacement is recommended.
Filter life may vary depending on source water quality, frequency of use, cleaning, storage conditions, and maintenance habits. Slower flow can indicate that the elements may need cleaning or replacement.
Cleaning and Maintenance
Black Berkey® Elements are re-cleanable during their service life. If the flow rate slows, the elements may be cleaned according to the manufacturer’s instructions and reinstalled after proper rinsing and priming.
Always handle elements with clean hands and avoid using soaps, detergents, or harsh cleaning products on the filter media unless the manufacturer specifically instructs otherwise.
Priming the Elements
Black Berkey® Elements require priming before first use. Priming helps prepare the filter media so water can pass through properly.
The included priming button is used with water pressure to help clear trapped air from the element's tiny pores. Follow the manufacturer’s priming instructions before installing the elements in your Berkey® system.
If your elements are not properly primed, the system may filter very slowly or may not filter as expected.
Important Use Notes
- Do not use Black Berkey® Elements with saltwater.
- Do not use Black Berkey® Elements with softened water, as this may shorten filter life and affect warranty coverage.
- Follow manufacturer instructions for priming, installation, cleaning, storage, and replacement.
- Use only compatible parts and accessories designed for your Berkey® system.
Return Notice
Filters that have already been used are not eligible for return or refund because they cannot be resold for health and safety reasons.
Frequently Asked Questions
How many Black Berkey® Elements are included?
This product includes two 9-inch Black Berkey® Elements, two washers, two wing nuts, and one priming button.
Where do the elements install?
Black Berkey® Elements install in the upper chamber of compatible Berkey® gravity-fed stainless steel systems.
How long do the elements last?
Each element is designed to filter approximately 3,000 gallons of water before replacement is recommended. Together, the two elements provide approximately 6,000 gallons of total filtration capacity under typical use conditions.
Do the elements need to be primed?
Yes. Black Berkey® Elements should be primed before first use. Proper priming helps water flow through the filter media correctly.
Can the elements be cleaned?
Yes. The elements are re-cleanable during their service life. Cleaning may help restore flow when the elements slow down due to buildup on the exterior surface.
Can these elements be used with softened water?
No. Black Berkey® Elements are not designed for use with softened water or saltwater. Using them with softened water can shorten their lifespan and may void warranty coverage.
Are Black Berkey® Elements recyclable?
The outer shell is made of polypropylene, commonly identified as Recycle Code 5. However, used filter elements are not typically recommended for household recycling because the internal media would need to be separated from the shell and may contain captured substances from use.
Final Product Summary
Black Berkey® Elements are replacement filter elements for compatible Berkey® gravity-fed water systems. They are made and assembled in the USA, sold as a set of two, and designed for long service life with proper use and maintenance.
For customers who are looking for a currently recommended alternative, please see the Phoenix Gravity New Millennium Edition Filter Elements.